How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. This requires the use of a handheld computer, known as Tech-2, to be used by the dealer. Then the transponder is replaced and a key must be purchased.
It is an excellent idea to rotate your keys in order that one does not get worn out more quickly than the other. This will keep your keys in top condition.
Replacement Case
The new key fobs are not like the old Saab keys. They are equipped with electronics which make it hard to duplicate. This has made car theft much more difficult than it was twenty years ago. It has also made it more costly to replace keys that were lost.
Every owner of a Saab 9-3 should have at minimum two working keys. It's expensive to replace a lost key, as it requires replacing the CIM module, as well as programming the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to avoid these costs. Some parts suppliers will use the code of a spare key to cut a new metal blade at a fraction what the dealer charges. The key must be the exact same as the original to allow it to work in your vehicle.
Follow these steps to replace the case. You'll require a flathead and patience. With the screwdriver, slowly pry the plastic apart and remove the emergency key from the case. Once the case is open, remove the electronic components and put them back into the new case. Make sure to insert the correct key and badge back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. The YouTube video of Cyclone Cyd shows how to replace the battery of the remote fob with only four steps. This tutorial can be used for any modern saab key fob, though the process may vary slightly.
The button is typically located just below the Saab logo on the back of the fob. This button is typically located on the back of your fob, next to the Saab Logo. Use a flathead to insert the screwdriver through the small hole in this button. This should be enough to open the case so that you can replace the battery.
Once you have installed the new battery CR1632, you are able to reassemble the remote key fob. You can then program it into your car. saab 93 key programming should not take more than an hour or less. This is a very easy procedure that doesn't require special tools.
If you lose a key the procedure will be slightly more complicated however it can be accomplished. The dealer has to read the car's VIN and then request a replacement key blade and a TWICE module with the proper unique code. After that, they will have to cut the replacement key and then program it with a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it has a battery within. Batteries are able to last for a short time and will eventually fail. It is a common problem in all vehicles. The good thing is that you can replace the battery on most key fobs, and not have to replace the entire case. Amazon sells replacement fobs that already have all the electronic components in place. You can simply remove the case and replace the batteries. You'll need to take out the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle of the. The screwdriver should be moved around the case until it will split open, making it easy to remove.
If you're looking to replace your keys, be sure to have a spare on hand. This can save you a lot of money. If you have a spare you can ask the dealer to cut the new key and program it to your car, which is cheaper than replacing the entire key fob.
It is possible to add a second key to your vehicle If you don't already have one, however it requires lots of research and work. It will cost you a few hundred dollars to add an additional car key. The computer in the vehicle must also be programmed. Professionals can accomplish this however, it's a costly option.
Replacement Ignition
As opposed to earlier Saab cars, the modern SAAB 9-3 models feature a much more sophisticated alarm system that is based on a coded key. If you lose your sole key, it may be costly to get another one, as the car has to have a special computer added and also be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program the new key even if they're unable to do it.
If you've lost only one working key, a dealer will repair your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you the highest price for it. Instead we can reprogramme the EEPROM on your existing car computer to allow it to be programmed to accept a second key, saving you over 50% of what you'll spend at a dealer.
If you've been an owner of an 03-11 SAAB 9-3, then you likely realize that the ignition key isn't very durable. They can get extremely sticky and the buttons can be removed from them at times, so you should consider getting a replacement if yours isn't performing as it should. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be done quickly.